FAQs
Frequently Asked Questions
If you don’t see the answer to your question(s) below, please feel free to contact us.
We are happy to answer any questions you may have.
General FAQs
Our name originates from the Latin verb, “to swim.”
Natare offers virtually all products for complete aquatic recreation including swimming pools, wet playgrounds, competition lap pools, spas, water features, and wave pools. Specifically our products consist of the following:
- Pre-engineered Stainless Steel Swimming Pool Construction Systems
- Elevated Pools
- GPM™ Grating Systems
- SOLID by RENOLIT Floor and Deck Surfacing
- Perimeter Recirculation Pool Gutter Systems
- Movable Bulkheads
- Natatec® PVC Membrane Systems
- Hydrotherapy Pools, Whirlpools and Spas
- Custom Fountains and Water Features
- Multi-Purpose Program Equipment
- MicroFlo® Vacuum Sand Filters
- VGBA-Compliant Drain Covers
- Spargers & Pool Bubblers
Natare provides design assistance and consulting services focused on pool systems and system integration. These services are intended to support project teams by providing technical insight related to pool construction systems and equipment.
Natare manufactures most products at the facility in Indianapolis, Indiana. Products are either partially or fully constructed and then shipped to the job site. Some products are supplied through specialized manufacturers.
Natare works with a network of builders and contractors throughout the world who install our products after they are shipped from our facility in Indianapolis, Indiana. In some cases, we install the product directly for the customer. In addition to working through our builder/distributor base, we also sell our products directly to general, specialty, and mechanical contractors, municipalities, and builders in states where we do not have an authorized builder/distributor.
We have direct partners all over the world, along with many dealers and distributors.
Yes. View Natare’s Privacy Policy and Terms of Use.
You may contact us directly at our Indianapolis, Indiana facility or by e-mail. Click here for contact information.
There are many advantages to choosing a stainless steel over concrete or gunite. First, a Natare stainless steel pool offers a completely welded stainless steel pool shell. This means it won’t leak. When building a pool on the roof, amenity deck or high-rise floor, it is invaluable to know your pool will not leak below into the livable units/areas. Stainless steel pools are also incredibly lightweight compared to traditional materials. In fact, they can weigh up to 9/10s less the weight than concrete or gunite. Finally, a stainless steel pool can be delivered in multiple ways to the project site included a fully-built, sectionalized, or even stick-built.
Typically, a Natare stainless steel elevated pool is built upon structural beams 4’ o.c. or a concrete slab. We can build a pool in a concrete vault, but it is not required.
Both. Any of our systems and equipment can be used for renovation or new construction. Many of our systems including the Natatec Membrane System provide a cost effective, low maintenance solution and help prolong the life of the aquatic facility. In addition, our pool bulkheads are great for accommodating multiple programming activities.
Yes. Natare builds equipment, systems, and services for commercial swimming pools, aquatic facilities, and water features. However, we also work with individuals on high-end residential projects.
Yes. In fact, we install our PVC membrane systems in multiple residential projects every year. While it is made specifically for commercial pools, we do have some residential clients who prefer this method over traditional vinyl liners.
Yes. Please see our PVC Pool Lining page for all colors and patterns.
We offer a 10-15 year warranty on the integrity of our PVC membrane system. However, when properly maintained, we have seen many cases where our system lasted 15+ years.
Traditional underwater windows are fabricated with a stainless steel frame and tempered glass. They can be installed up to a certain size and depth. Acrylic panels can be customized to virtually any size, shape and can be installed in many different applications.
No. The pool must be full of water to move a Natare bulkhead.
Yes, we can build a bulkhead for a pool not intended to be moved. It can help with dividing a large pool, or simply a walking surface to create more pool deck in a certain area.
It can be customized to fit many different applications.
Specifications for our products are available in PDF formatted, or read-only, files upon visiting the Knowledge Center section. CSI formatted files are available upon request.
Typical designs, details, drawings, and illustrations for our products are available in PDF formatted, or read-only, files upon visiting the Knowledge Center section. For CSI formatted files, please contact us.
AutoCAD files are available upon request.
